Out of Stock
QSC Audio CX602V Power Amp- Designed to meet the specialized needs of sound contractors with high output power, versatile loading options, high thermal capacity and reliability-the ideal solution to any permanently installed sound system. The CX602V is designed to meet the specialized needs of sound contractors with high output power, versatile loading options, high thermal capacity and reliability, the CX602V is the ideal solution to any permanently installed sound system. This 70 volt direct model has been designed from the ground up, combining QSC's exclusive PowerLight¢ç technology with specific features to meet the requirements of fixed installations. MORE»
| Price | $1,772.00 |
Out of Stock
The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the ground up, combining QSC's exclusive PowerLight® technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and proven reliability, the CX Series is the ideal solution to any permanently installed sound system. Q-Sys Compatible Advanced monitoring and control when used with a Q-Sys or BASIS system. Learn moreThe model line incorporates QSC's exclusive PowerLight technology. Three models, the CX302V, CX602V and CX1202V, provide direct 70 volt capability ranging from 250 watts to 1000 watts per channel for distributed audio systems. The CX302, CX502, CX702, CX902 and CX1102 offer low impedance capability and range in power from 325 watts to 1100 watts per channel at 4 ohms (20 Hz -20 kHz, 0.05% THD). The versatile CX902 and CX1102 have the ability to drive both 70 volt and low impedance loads for maximum flexibility. The CX amplifiers are equipped with many contractor specific features including 1 dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active inrush limiting eliminates AC inrush current, cutting the need for power sequencers. CX amplifiers also include an HD15 Data Port connector to interface with Q-Sys and QSControl networked audio systems, for remote amplifier monitoring and control MORE»
| Price | $1,772.00 |
Out of Stock
CX 2-Channel Series The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70 volt direct models have been designed from the ground up, combining QSC's exclusive PowerLight® technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution to any permanently installed sound system. The expanded eight model line now incorporates QSC's exclusive PowerLight technology. Three models, the CX302V, CX602V and CX1202V, add direct 70 volt capability ranging from 250 watts to 1000 watts per channel for distributed audio systems. The CX302, CX502, CX702, CX902 and CX1102 are low impedance versions ranging in power from 325 watts to 1100 watts per channel at 4 ohms (20 Hz -20 kHz, 0.05% THD). The new CX amplifiers are equipped with many contractor specific features including 1 dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active inrush limiting eliminates AC inrush current, cutting the need for power sequencers. CX amplifiers also include an HD15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allowes remote amplifier monitoring and control via a standard Ethernet network. MORE»
| Price | $2,115.00 |
Out of Stock
The QSC GX5 Stereo Power Amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output and appearance of the rackmountable GX5 while reducing raw material cost and weight. The GX5 power amplifier provides full performance for 500 watt (Program) speakers and supplies maximum possible power to 4 ohm and 8 ohm loads. Owners of popular 4 ohm loudspeakers (dual-woofer, two-way models and many subwoofers) will find the 700 watt (4 ohm) power of the GX5 an ideal match. The GX5 power amp uses a Class H system, based on key elements of the PLX Series, almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss. MORE»
| List | $499.00 |
| Price | $488.84 (Save: $10.16) |
Out of Stock
The GX7 professional power amplifier continues in the tradition of QSC's top-selling GX Series professional power amplifiers by offering an attractive combination of power, fidelity, configurability, long-term reliability, and overall value. At the heart of the GX7 is an all-new, advanced power supply based on the road-proven PowerLight Series technology. The result is a more overall power output in a lightweight casing compared to previous GX models—without any sacrifice in audio quality. At 1000W per channel at 4 ohms, the GX7 provides more than ample power to connect up to four 500W 15" 2-way speakers or two 1000W subwoofers at a time. This will help to keep your overall system cost down while still maintaining maximum performance levels. The 8 ohm output is 725 watts per channel which yields considerable headroom and increased dynamic range for today's popular loudspeakers. MORE»
| Price | $734.09 |
Out of Stock
The PowerLight™ 3 Series is designed for the most demanding live audio users, whether in touring rigs or fixed installations. The most requested features of the PowerLight 2 series have been upgraded to deliver “the ultimate analog amplifier”, while the QSC DataPort ensures full compatibility with advanced digital processing and QSControl.net™. Three models range in power from 1250 watts to 4000 watts per channel at two ohms, all in two-rack space chassis that are only 15.6" (40 cm) deep and 22 lb (10 kg). In addition to higher power, the PowerLight 3 Series offers higher input voltage, selectable sensitivity, and easily adjusted rear panel switches with color coded LED indicators. For those users who simply want a high performance amplifier to go with their existing processor or console, the PowerLight 3 Series is an ideal choice, offering high power, excellent value, and zero signal latency. When complete integration of amplifier control, monitoring and DSP is desired, the PowerLight 3 Series is fully compatible with the QSControl.net™ BASIS™ networked audio platform, with its comprehensive drag and drop DSP functionality. Simpler DSP requirements can be met with the DSP-4 processing module. The flagship of the PowerLight 3 Series is the new 8000 watt PL380. This highly refined, all-switchmode amplifier incorporates nearly 40 years of QSC engineering experience, resetting expectations for Class D audio quality. The PL380 combines a pair of 4000 watt Class D amplifier channels with the well proven PowerLight supply, to deliver more than twice as much audio power as previous 2 rack unit PowerLight amplifiers. Reactive “back EMF” from the speaker is recycled to the power supply, and unmatched “plug-to-plug” efficiency of 85% keeps AC power needs to a minimum, while delivering more energy to the speaker. Years of patient development have resulted in outstanding 20 Hz – 20 kHz audio performance, plus complete protection from normal hazards of the trade. Even simple features such as dependably silent, surge-free on-off switching indicate the special care taken to keep things safely under control. The most pronounced “sonic signature” of the PL380 is one of immense headroom, sailing through even the most difficult loads with no signs of stress or change of tonality. For lower power applications, the PL325 and PL340 offer the same feature set, matched to upgraded versions of QSC’s most advanced linear amplifier platform. Recent advances in power supply capacitors further improve power and low-impedance performance, while continuing to offer the best available audio performance. As a result, designers have the choice of running a single type of amplifier throughout their rig, or matching amplifier performance to specific transducer types. In keeping with normal QSC design standards, back-to-front airflow provides up to twice as much long-term average power as most competitors, without dumping hot air into the rack. All PowerLight 3 models are built in the same chassis size, with common back panel layouts to facilitate easy racking and hookup. MORE»
| List | $1,874.00 |
| Price | $1,841.26 (Save: $32.74) |
Out of Stock
The compact PLX1804 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1804 is perfect for ultra-portable rigs, as well as reference-quality playback. MORE»
| List | $1,080.00 |
| Price | $909.34 (Save: $170.66) |
Out of Stock
The PLX3102 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3102 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean. Audio Quality PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. Stereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohms Bridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohms MORE»
| List | $1,513.00 |
| Price | $1,291.59 (Save: $221.41) |
Out of Stock
The PLX3602 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3602 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean. Audio Quality PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. MORE»
| List | $1,802.00 |
| Price | $1,547.61 (Save: $254.39) |
Out of Stock
In the QSC RMX 2450 Power Amp, QSC has combined their rugged high-output designs with the latest circuit technology to deliver unmatched performance at a breakthrough price. RMX power amps require only 2 rackspaces and feature 1/4" TRS, XLR, and barrier strip balanced inputs; binding post and Neutrik Speakon outputs; front-mounted gain controls for easy access; independent and defeatable clip limiters; selectable low-frequency filters (30Hz or 50Hz) that protect speakers and increase headroom; signal and clip LED indicators; independent DC and thermal overload protection on each channel; variable-speed fan. All include a 3-year warranty. Stereo: 500W @ 8 ohms, 750W @ 4 ohms, and 1,200W @ 2 ohms. Bridge mono: 1,500W @ 8 ohms, 2,400W @ 4 ohms. MORE»
| List | $901.00 |
| Price | $852.13 (Save: $48.87) |
Out of Stock
QSC's RMX 4050HD power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile DJs, the RMX 4050HD is optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability. Like its smaller sibling (the RMX 1850HD), the RMX 4050HD is one of two RMX "Heavy Duty" models designed to work as hard into 2 ohm loads as most competing amplifiers will at 4 ohms. With a three-tier, Class H design, the RMX 4050HD is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The 120 volt versions of the RMX 4050HD accomplish all this with a standard 15 amp plug. Like all RMX amps, the RMX 4050HD features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon® outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. MORE»
| List | $1,700.00 |
| Price | $1,598.14 (Save: $101.86) |
